TONGER® Cat Silicon Night Light

  • $16.99
  • Save $32


  • Material:ABS+Silicon
  • Size:12.2*12.2*15.3cm(4.8*4.8*6.02inch)
  • Without Remote Controller Light Color:7 color
  • With Remote Controller Light Color:16 color with fade/smooth/fade/flash function
  • Power:USB cable( inclued) recharged
  • Input Voltage / Current:5V    1000mA
  • Battery Capacity:1200mAh
Instructions:
  1. Please fully charge the product before first use. Charging voltage / current DC5V  1000mA. Power bank with equal voltage can be used to charge it as well. It will take about 3 hours to fully charge the product. (actual charging time is based on the charger’s input current.)While charging, the red indicator light flashes; once fully charged, the red indicator light  will remain on.Using time after fully charged: approx 10 hours under warm light; approx 9 hours under colorful light.
  2. Power Switch: press it to turn on warm white light; press again to turn off.
  3. Tap to change led colors: turn on the lamp, it is warm white light. Then tap the lamp for the first time, the led light will change gradually every three seconds; tap again, the light color will remain on ; tap thirdly, the light is off; tap fourthly, warm white light again; circulation.
  4. When the light is turned off by tapping, the product is still working and there is a quiescent current. If it’s not used for a long time, please turn off the light by power switch to help protect the battery life.
  5. After fully charged, please cut off the power in time.
Attentions:
  1. Kids under six should use this product under adults’ supervision. 
  2. Do not disassemble the internal device to avoid damaging the components.
  3. When not in use for a long time, please place the product in a dry environment.
  4. The light source is not replaceable; the whole lamp should be replaced when its lifetime comes to end.
  5. To prevent falling over, please use it on a table with a slope less than 6 degrees.