TONGER® Girls Snowman Silicon Music Light

  • $19.99


  • Material:ABS+Silicon
  • Size:11.6*11.6*18cm(4.56*4.56*7.08inch)
  • Light Color:7 color
  • Music Mode:Yes
  • Power:USB cable( inclued) recharged
  • Input Voltage / Current:5V    1000mA
  • Battery Capacity:1200mAh


Instructions:
  1. Please fully charge the product before first use. Charging voltage / current DC5V  1000mA. Power bank with equal voltage can be used to charge it as well. 
    It will take about 3 hours to fully charge the product. (actual charging time is based on the charger’s input current.)
    While charging, the LED indicator light flashes; once fully charged, the red indicator light  will remain on.
    Using time after fully charged: approx 20 hours under warm light; approx 15 hours under 7-color breathing mode,if no action,it will turn off automatically in 2 hours.
  2. Power Switch: press the power button to turn on warm yellow light(silent mode.);long press again to swithc between silent mode and music mode. When it is turned to music mode,the red indicator will turn on and flash slowly.
  3. Silent Mode: Tap the lamp the 1st time to switch from warm yellow light to 7-color breathing light mode; Tap the 2nd time to stay at a static color; Tap the 3rd time to stanby mode;Tap again to cylce.
  4. Music Mode: Under warm yellow light(no music),tap the lamp the 1st time to swith to 7-color breathing light mode(3s per color) qith music playing; tap the 2nd time to stay at a static color with music playing again; tap the 3rd time to standby model(no music), Tap again to cycle. Music lasts about 10s per tap.
  5. Press the power button to turn it off and back to silent mode.
    Under Standby mode,the product is stillgenerating quiescent current. If it’s not used for a long time, please turn off the light by power switch to help protect the battery life.
  6. .After fully charged, please cut off the power in time.
Attentions:
  1. Kids under six should use this product under adults’ supervision. 
  2. Do not disassemble the internal device to avoid damaging the components.
  3. When not in use for a long time, please place the product in a dry environment.
  4. The light source is not replaceable; the whole lamp should be replaced when its lifetime comes to end.
  5. To prevent falling over, please use it on a table with a slope less than 6 degrees.